If you’re hunting for the best multi-device Qi2 chargers for your iPhone setup in 2025, we’ve already put them through the wringer. We don’t just unbox the products. We test charging speed, heat, and efficiency across solo and fully loaded scenarios. After measuring real power delivered to the phone and monitoring thermals, here are the top 3 Qi2 3-in-1 stands that actually deserve your money.
How We Test Multi-Device Chargers
We measure real-world speed and efficiency in multiple scenarios: solo iPhone, solo non-iPhone, and fully loaded with headphones and smartphones. We log energy from the wall and calculate how much actually reaches the phone, then track heat across the run.
We buy everything ourselves and don’t take sponsorships. Remember we are reviewers, not influencers. If our data helps you decide, using the links here helps us keep doing rigorous, independent testing at no extra cost to you.
3. Mophie Snap+ 3-in-1 Wireless Charging Stand (Qi2)
| Features | Details | Average |
|---|---|---|
| Price | $130 | $97 |
| Solo Device Charge Speeds | 34% (4.7Wh) | 34% (4.2Wh) |
| Multi-Device Charge Speeds | 37% (5.1Wh) | 36% (4.63Wh) |
| Temperature | 61–62°C / 142–144°F | 55°C / 131°F |
The Mophie Snap+ 3-in-1 feels premium right out of the box. While it looks like plastic, it’s actually powder-coated metal, making it one of the sleekest and thinnest desk chargers we’ve tested. It ships with a charging brick and a 59-inch cable built into the brick. With its not-too-wide, not-too-short profile, placement isn’t an issue, and the tiltable head adds flexibility. Oddly, the headphone area has its own indicator light, which feels out of place.
In our solo iPhone test, Mophie delivered 34% in 30 minutes (4.7Wh) but efficiency dragged it down: only 59% of wall power reached the phone (62% average). Heat was the bigger downside at 61°C (142°F), hotter than most chargers we’ve tested.
Fully loaded with multiple devices, speed ticked up to 37% in 30 minutes, but temps also climbed (62°C) and the charging profile dropped 34% over the run (vs. 26% average). Here’s the deal: it’s fast, but it wastes more energy and runs warmer than we’d like.
That said, the design is a standout. We’d use it at a desk more than a nightstand given the height. At $130, you’re paying a premium (category average ~$97). If you want the best-looking multi-charger and don’t care about efficiency, Mophie’s Snap+ is a solid desk pick.
2. Anker MagSafe Charger Compatible, MagGo 3-in-1
| Features | Details | Average |
|---|---|---|
| Price | $90 | $97 |
| Solo Device Charge Speeds | 34% (5.1Wh) | 34% (4.2Wh) |
| Multi-Device Charge Speeds | 39% (5.4Wh) | 36% (4.63Wh) |
| Temperature | 49–51°C / 120–124°F | 55°C / 131°F |
Anker’s “MagGo” lineup can be confusing, but this 3-in-1 stand earns its spot for its tiny footprint. Compared to Mophie, it feels cheaper — plasticky and fingerprint-prone — but it’s practical. You get a 57-inch cable and a 40W brick. The head tilts for easy placement, and it supports big phones, though the largest iPhone can feel a touch off-centered.
Solo iPhone testing hit 34% in 30 minutes (5.1Wh), but efficiency was weak at 51% vs. the 62% average. The upside: it ran cooler at 49°C (120°F), which is great for longevity and nightstand use.
Under a full load, the MagGo shines: 39% in 30 minutes with a stable profile and temps around 51°C. Honestly, that’s what these stands are built for and Anker nails it here.
At $90, it’s slightly below average on price but above average for multi-device stability. If you want a compact stand for desk or nightstand and care more about loaded performance than solo efficiency, the MagGo 3-in-1 is an easy recommendation.
1. ESR Qi2 3-in-1 MagSafe Charger Stand with CryoBoost
| Features | Details | Average |
|---|---|---|
| Price | $73 | $97 |
| Solo Device Charge Speeds | 38% (5.2Wh) | 34% (4.2Wh) |
| Multi-Device Charge Speeds | 42% (5.8Wh) | 36% (4.63Wh) |
| Temperature | 49–53°C / 120–127°F | 55°C / 131°F |
ESR’s Qi2 3-in-1 is the tallest and most ambitious design here. The charge pads are plasticky, the neck is metal, and overall it looks a bit lanky but purposeful. It ships with a 30W charger and nearly 59-inch cable. Placement is easy, though the head is fixed at an angle and it’s bulkier than the others. The Apple Watch pad is removable, so non-iPhone users can still get value from the stand
The killer feature is CryoBoost, ESR’s active-cooling fan. We measured ~40dB at the fan: invisible in an office, audible in a quiet bedroom. The payoff is performance. In solo iPhone testing, it hit 38% in 30 minutes (5.2Wh). Efficiency was 56% (below 62% average), but temps stayed near average at 53°C (127°F).
Loaded results are the headline: 42% in 30 minutes with an impressively flat charging curve and temps around 49°C (120°F). The “headphone” pad is also not locked to low-watt earbud speeds. Drop another phone and you still get normal Qi rates, a rarity in our test group.
At $73 ESR is a bargain that’s fast, stable, and cool under load. The fan is a red flag for bedroom use, but for desks and offices, it’s easily the best multi-device Qi2 stand we tested.
Final Thoughts
The ESR Qi2 3-in-1 is the cheapest at $73 and also the best overall thanks to its speed, stability, and cooling under load. The Mophie Snap+ brings the most premium design but runs hotter and costs the most at $130. Anker’s MagGo balances a compact footprint with strong loaded performance at $90. If we’re picking one for our desk, we’re choosing the ESR. It’s the most complete package for the price.