By Aaron Ho, MobileReviewsEh. Tested August to September 2026. Published September 27, 2026.
We added another 10 MagSafe Grips to our collection in 2026. To come up with our Top Picks, we measured the magnetic force with a force gauge, weighed them and ranked also on comfort, 1-Hand Usage and pocket smoothness.

As an Amazon Associate I earn from qualifying purchases. Links marked (paid link) earn us a commission; most go to Amazon through our site.
- FLOLAB ForgeGrip magnetic phone grip and stand for MagSafe, telescoping stem, carbon fiber (Easiest To Use): 30 N to push off (the 2026 average is 13 N), 13.2 N to pull off, 38 g. About $25 USD when tested. Check price on Amazon (paid link) or buy direct from FLOLAB with code MRE10 (paid link)
- Sinjimoru M-Tap Tok Ring Stand magnetic phone grip for MagSafe, soft silicone stem, ring stand (Most Comfortable): 17.4 N to push off (the 2026 average is 13 N), 11.6 N to pull off, 40 g. About $20 to $30 USD when tested. Check price on Amazon (paid link)
- PopSockets Low-Pro Grip for MagSafe, ultra-thin grip with pull-out ring stand (Slimmest Profile): 18 N to push off (the 2026 average is 13 N), 17 N to pull off, 20 g. About $40 USD when tested. Check price on Amazon (paid link)
- MOFT Phone Tripod Stand for MagSafe, two-height stand and grip, vegan leather (Most Useful): 17.1 N to push off (the 2026 average is 13 N), 9.2 N to pull off, 91 g. About $40 USD when tested. Check price on Amazon (paid link)
Video: Top 4 MagSafe Grips for iPhone 18 (The Cheapest One Won), 7:47, published September 27, 2026 on YouTube.
Chapters:
- 0:00 Intro
- 0:10 No. 4 – Most Useful
- 1:48 How I Test
- 2:22 No. 3 – Slimmest Profile
- 4:08 No. 2 – Most Comfortable
- 5:43 No. 1 – Easiest To Use
#1 Easiest To Use: FLOLAB ForgeGrip magnetic phone grip and stand for MagSafe, telescoping stem, carbon fiber

ASIN B0G71FHF14.
- Took 30 N to push sideways off the phone, 17.0 N above the 2026 average of 13 N.
- Took 13.2 N to pull straight off.
- Weighs 38 g (18% of an iPhone 18 Pro, which weighs 211 g).
- About $25 USD when tested.
Stand: A ring on the base folds out as a stand, and it holds the iPhone in landscape or portrait easily.
Hands-on: Telescoping stem that locks from the side. One-hand deploy, every time. It took us a couple of days to get used to. It catches on pockets like every grip here; for us it's worth it.
Check price on Amazon (paid link) or buy direct from FLOLAB with code MRE10 (paid link)
#2 Most Comfortable: Sinjimoru M-Tap Tok Ring Stand magnetic phone grip for MagSafe, soft silicone stem, ring stand

ASIN B0FLXGGYNV.
- Took 17.4 N to push sideways off the phone, 4.4 N above the 2026 average of 13 N.
- Took 11.6 N to pull straight off.
- Weighs 40 g (19% of an iPhone 18 Pro).
- About $20 to $30 USD when tested.
Stand: A thin ring stand that works in landscape and portrait. We're not fans of thin ring stands, but every grip in our top 3 has one.
Hands-on: Soft stem and a bigger button. The easiest one-hand deploy in the video. The most comfortable grip we've tested. It catches on pockets, and it may be discontinued.
Check price on Amazon (paid link)
#3 Slimmest Profile: PopSockets Low-Pro Grip for MagSafe, ultra-thin grip with pull-out ring stand

ASIN B0H74PY2DB.
- Took 18 N to push sideways off the phone, 5.0 N above the 2026 average of 13 N.
- Took 17 N to pull straight off.
- Weighs 20 g (9% of an iPhone 18 Pro).
- About $40 USD when tested.
Stand: A thin ring you pull out of the grip works as a stand, in landscape and portrait.
Hands-on: Thin enough to wireless-charge through. Symmetrical stem, so there's no lining it up. It takes two hands to deploy; you pick at it. The catch: it stays on the charger, not the phone.
Check price on Amazon (paid link)
#4 Most Useful: MOFT Phone Tripod Stand for MagSafe, two-height stand and grip, vegan leather

ASIN B0F3762SPV.
- Took 17.1 N to push sideways off the phone, 4.1 N above the 2026 average of 13 N.
- Took 9.2 N to pull straight off.
- Weighs 91 g (43% of an iPhone 18 Pro).
- About $40 USD when tested.
Stand: One of the best stands we've used: two heights, low and high, each working in landscape and portrait. Great for the office and for voice calls.
Hands-on: Stand first, grip second: two heights, landscape and portrait. It needs two hands to open. The best stand in the video, and it rarely catches a pocket.
Check price on Amazon (paid link)
Every grip was first screened by hand for hold and daily use. Only the final round was measured with the force gauge, so the grips below have no gauge numbers.
Disqualified
- EWA MagOne Gen 3.5 magnetic grip for MagSafe, finger strap, removable ring kickstand: uncomfortable to use. The strap is uncomfortable.
- GripMate 2nd magnetic ring holder for MagSafe, slim finger loop: uncomfortable to use. The finger loop hurts in medium to long use.
- Deff MagSnap magnetic ring holder for MagSafe, aramid fiber, 4 mm: uncomfortable to use. The design hurts fingers.
- Spigen O-Mag MagFit magnetic phone grip, nylon finger strap: uncomfortable to use. The strap is small, so the iPhone feels heavy on the fingers.
- Casespire Dual-Sided magnetic silicone phone grip for MagSafe: annoying to use.
- UAG Monarch Mag2 magnetic ring stand for MagSafe, metal, built-in bottle opener: broke in normal use. The hinge broke after one month of use.
- andobil Unrivaled Stability magnetic grip and ring stand for MagSafe, 2025: annoying to use.
Also tested
- andobil Ultra-Thin magnetic grip for MagSafe, rotating ring and kickstand, 2025: Decent, but not as good as the PopSockets Low-Pro Grip.
- Tango Ultra Thin phone grip for MagSafe, steel, poppable and standable: Last year's winner. Super thin, but not as comfortable as this year's top picks.
- PopSockets Softgoods Phone Wallet with Expanding Grip for MagSafe: Not as comfortable as this year's top picks.
- PopSockets PopGrip for MagSafe, round grip and stand: Last year's winner.
All grips, measured
Figures for the top 4 are as published in the video. “Not measured” means the grip was cut at the hand screen, before the gauge round.
| Grip | Result | Push-off (N) | Pull (N) | Weight (g) |
|---|---|---|---|---|
| FLOLAB ForgeGrip | #1 pick | 30.0 | 13.2 | 38 |
| Sinjimoru M-Tap Tok Stand | #2 pick | 17.4 | 11.6 | 40 |
| PopSockets Low-Pro Grip | #3 pick | 18.0 | 17.0 | 20 |
| MOFT Phone Tripod Stand | #4 pick | 17.1 | 9.2 | 91 |
| EWA MagOne Gen 3.5 | Disqualified: uncomfortable to use | not measured | not measured | not measured |
| GripMate 2nd | Disqualified: uncomfortable to use | not measured | not measured | not measured |
| Deff MagSnap | Disqualified: uncomfortable to use | not measured | not measured | not measured |
| Spigen O-Mag MagFit | Disqualified: uncomfortable to use | not measured | not measured | not measured |
| Casespire Dual-Sided Magnetic Silicone Phone Grip | Disqualified: annoying to use | not measured | not measured | not measured |
| UAG Monarch Mag2 | Disqualified: broke in normal use | not measured | not measured | not measured |
| andobil 2025 Unrivaled Stability | Disqualified: annoying to use | not measured | not measured | not measured |
| andobil 2025 Ultra-Thin | Tested, not picked | not measured | not measured | not measured |
| Tango Ultra Thin Phone Grip | Tested, not picked | not measured | not measured | not measured |
| PopSockets Softgoods Phone Wallet with Expanding Grip | Tested, not picked | not measured | not measured | not measured |
| PopSockets PopGrip for MagSafe | Tested, not picked | not measured | not measured | not measured |
How we tested

- One retail unit of each grip, on the same iPhone for every test.
- Every grip was screened by hand first; only the final round went on to the force gauge.
- Push-off force: the phone is marked at the centre of its MagSafe ring, and a force gauge pushes the grip sideways off it. Mean of at least 3 readings.
- Pull force: the gauge's hook pulls the grip straight off the phone. Mean of at least 3 readings.
- The 13 N average is push-off force across every MagSafe wallet and grip we tested in 2026.
- Weight measured on a scale.
- Comfort, one-hand deploy, the stand and pocket catching are our own calls from daily use.
Not tested: long-term magnet wear, drop safety.
As an Amazon Associate I earn from qualifying purchases.
- FLOLAB ForgeGrip magnetic phone grip and stand for MagSafe, telescoping stem, carbon fiber: Check price on Amazon (paid link) or buy direct from FLOLAB with code MRE10 (paid link)
- Sinjimoru M-Tap Tok Ring Stand magnetic phone grip for MagSafe, soft silicone stem, ring stand: Check price on Amazon (paid link)
- PopSockets Low-Pro Grip for MagSafe, ultra-thin grip with pull-out ring stand: Check price on Amazon (paid link)
- MOFT Phone Tripod Stand for MagSafe, two-height stand and grip, vegan leather: Check price on Amazon (paid link)
Video transcript (YouTube auto-captions)
Intro
So, that was neat. Some of the perennial winners like these guys. In fact, I find this design kind of repulsive now. Pretty sure we've entered peak mags safe
No. 4 – Most Useful
grip design. Here's number four goes to the Moth tripod stand. This is one of my favorite products for the iPhone hands down. Footprint of this product is borderline comical, especially on the 18 Pro, and it is quite heavy. Going to add 91 g to your iPhone. I know some of you might be thinking, "This is a stand, not a grip." And you'd be right. This is an excellent stand, but also works incredibly well as a grip because your fingers have lots of things to go into. Even with this hinge here, you could tuck a finger in and you've just got like so much grip on your phone. And when it comes to iPhone grips, rigidity, stiffness is king. Now, the benefit of this product is that it will stop your iPhone from sliding around all over the place. Now, this is one of the best stand products that I've used for the iPhone because you could prop it up high, you can prop it up low, and it works both in landscape and portrait modes. So, if you're a person who does a lot of video calls, this setup is just so good. And when it comes to magnetic strength, I wouldn't worry about it. Push is a little higher than average. Pull is a little lower from the top of the stand, but because there is this hinge, the hinge has a lot more give before the back actually pops off. Now, one of the downsides is that this requires two hands to get to, it's not exactly user friendly. If you have two things in your hands, one of them is this. Trying to get it open is borderline painful. Doable, but painful. And when it comes to pocketability, yeah, it's so flat, it's not going to get caught on anything. Another downside is that this is going to set you back $40. But the versatility of this product is definitely worth it. I've bought three in the last uh four or five years. Not because they've broke, it's just I buy products every few years just to see if
How I Test
they're better or worse. How do I test Mag Safe grips? Biggest thing I do is I buy every single one I see and I use them all. Now, some of them will get years of use like this thing. This is the encased grip. It doesn't collapse, but is incredibly comfortable. And others, like these fabric type of uh grips, absolutely terrible. I will use it for about 2 hours and then I will never use it again. Biggest thing I do is measure how much force it takes to pull and push these uh things off an iPhone. So, if you're planning on getting a Mag Safe Grip, use my links. It doesn't cost you anything extra and you'll be supporting me, your friendly
No. 3 – Slimmest Profile
neighborhood reviewer, not influencer. Number three goes to this thing. It's the PopSocket Low Pro Grip. This isn't your typical PopSocket grip. Now, this low pro grip, you might confuse it as a uh O snap. Popsocket basically copied the O snap and made it better. Weird in the way that you don't have to deal with this asymmetrical uh stem. This lowro pop grip has a symmetrical stem, which means when you do this, it's very comfortable. product is super light at 20 grams. It's super thin and unlike some of the other super thin grips that I have, it's comfortable and easy to use. I'm a big fan of this tango grip, but the springs on this grip are pretty uncomfortable for long-term use. And one of the craziest thing is that this thing is thin enough that you can use G2 wireless charging accessories with it. That's pretty cool. Except when you take it off, the grip comes off of the iPhone and sticks to whatever charging it. and it's pretty annoying to take off. So, not exactly a function to uh brag about. This grip does come with a built-in stand. Set it up this way. You can also set it up this way. Strong enough that if you were to do this, I wouldn't be too worried about it. Had one of the strongest magnets out of my big group of grips. Now, getting to the grip requires to dig at the top. It is doable with one hand. You got to practice, but more often than not, I am using two hands to uh access this grip. My biggest issue is that it doesn't really spring up too much. You got to really make sure that your fingers are doing this scooping motion to get into this grip. Now, how comfortable is it? This thing is so much better than a traditional PopSocket. In fact, I've stopped using these Popsocket rounds or PopSocket grips because they are just terrible when compared to my number two pick. Now, in terms of pocketability, it's so smooth. Ain't nothing's getting caught with this on the back of your iPhone. In terms of
No. 2 – Most Comfortable
price, ouch. All right. This is number two. I'm not a big fan of Sinju as a brand. They've got a ton of grips and they go with a shotgun style. They just they've got so many different ones and I I'll be honest with you, I don't know if they still make this one. So, it's probably going to be the hardest to get on my list, but it is if you like PopSockets, uh you're going to love this thing. Now, the footprint of this product looks like it's bigger than the PopSocket. It really isn't. This is a trend I've been noticing. The thing pops out like a popsocket. This thing weighs 40 gram and like the low pro grip comes with this ring style stand which works but has nothing against my uh number four pick, right? Like I get it. It is minimal and barely functional. Even my top pick has this feature on it. So for mag strength, it's one of the weaker in the bunch, but still above average. Getting to this grip with one hand is easy. You just slide your fingers in, but still not as quick as my number one pick. When it comes to comfort, this thing is a pillow for my fingers. The button for this grip is way bigger than the PopSocket, which means there's better weight distribution for my fingers. And the stem itself is incredibly soft, unlike the stem on the PopSocket. Pocketability is going to be an issue cuz it's going to get caught on your pants. But you can get around that by, you know, cupping the grip when you pull it out of your pocket. It's just one of those things you just learn to get used to it. When it comes to price, it's around $30. 20 if you get a really crummy color. But again, you might have trouble finding this Proet product because I don't know if they actually make it anymore, but they still sell it. Now, the number one grip that I always default to despite having a lot of
No. 1 – Easiest To Use
choice is the Flow Lab Forge grip. Now, Flab is always filled with surprises, and when they released this a few months ago, I fell in love with it right away. Terms of weight, it's 38 g, kind of mid in terms of weight. The stem on this product is telescoping and collapsible. Forge grip also has a stand built into it. It's not as slick as the Moth product, but gets the job done like the other three. In terms of magnetic strength, it is ridiculous to push and pull off. 30 seems a bit high. 21.1 19.2 20 closer to uh 20 newtons. That's still stronger than every single grip in this video. Now, for me personally, with iPhone accessories, anything that helps my access to my device is king. So, having a good screen protector is important, and having a good grip is almost as important. It is just so easy to get at this with one hand. Phone's in my back pocket, phone's in my hand already. Like, it's just that quick. Yes, this thing will get caught on pockets, obviously, but the access outweighs that nuisance by ah, like 10 magnitudes. Now, I'll be honest with you. It took a couple of days to get used to the grip because of the telescoping stem. This isn't exactly smooth, so it kind of digs into your fingers a little bit, but I'm completely fine using this for hours on end. Remember, I've got 12 and 1 half hours of screen time a day. This thing just works. Trust me. Now, when it comes to price, cheapest one in the video, and it works the best. So, get this Moff Stand tripod if you do a lot of video calls and still need a grip. The Popsocket Low Pro grip going to be great for the occasional grip user who just doesn't want anything getting in the way. The Synimoru endtap stand thing is for anybody looking to replace their old pop grips. And the Forge grip, well, again, anybody who appreciates quick access to their iPhone. That's all I got for this video. Questions, comments, leave them down there. There's a product you want me to check out, leave in the comments and I'll uh scrape it and see if I can find it. Again, if you're planning on getting one of these products, make sure you use my links. I'm a reviewer, not an influencer. No company is paying me to make this video. All I care about is just finding the best accessories for my