FlyGrip Review – iPhone 6/6 Plus

Utility – The FlyGrip is pretty damn useful

In terms of design, the FlyGrip attaches semi-permanent through an adhesive. The adhesive is strong as none of the cases or iPhone came flying off the Flygrip and the company was awesome enough to include 2 in each package. We did try to install the FlyGrip on a more flexible case like the Tech 21 Evo mesh which we would NOT recommend as the edges of the FlyGrip began to split.

In terms of utility and for this review, which we’ll define as how useful it is, I found that using the FlyGrip makes more sense for larger devices such as the iPhone 6 Plus, a iPad Mini or a iPad Air as it allows you to basically 1-hand the large device. People with smaller devices such as the 5 and 6 might not appreciate the FlyGrip as much.

Using the FlyGrip is fairly simple as all you have to do is apply a bit of pressure to the clip and it pops off. There is a satisfying click when the clip opens up as there is a magnet in the clip and the only reason why we knew that is because of a metal bracket that fell out during a removal.

There are two sizes to each FlyGrip, a medium and large and my fingers felt the most comfortable in the large version of the case. If you have smaller fingers are think the FlyGrip’s edges are a little too sharp, you can install foam padding that (they provide) to ensure the proper fit.

During my review period, I found keeping the FlyGrip in the middle of my iPhone offered the best finger reach as I was able to cover the full screen. On my application on my Griffin Survivor Core, I kept it towards the bottom of the case which made it harder to reach the top of my iPhone screen.

Again, the utility of the FlyGrip is pretty great but there’s something you can’t do with the FlyGrip that you can do with a similar accessory, the Loopy case which I’ll elaborate in a bit.

The FlyGrip also doubles as a stand for both landscape and portrait modes which is really nice, especially for people who like to cook and stare at recipes on their iPhone’s while they do so.
[divider][/divider]

Practicality – Use the FlyGrip as a stand!

In terms of practicality, the only thing I noticed was that it does add a bit of bulk to your iPhone. You’re basically adding an awkward shape to the back of your iPhone which has been designed with all these smooth curves.

Every once in a while, the FlyGrip will snag on a pocket and release but this is a pretty small but still something that we felt was worth noting.

[divider][/divider]